LANTAC 223/5.56 EBCG Full Auto Style Bolt Carrier Group TiN

Out of stock

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to

Our new TiN E-BCG is precision machined from 8620 Steel with a shot peened bolt manufactured from Carpenter 158 and Magnetically Particle Inspected.The entire carrier assembly is TiN, Titanium Nitride coated. The carriers patented and patent pending design features unique shrouded and forward facing gas ports that have also been re sized so that gas is vented differently to a standard carrier.This results in a system that runs flatter with a smoother energy pulse.In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel.The flared boss at the tail of the carrier enhances the BCG's lock position within the upper and makes it more consistent, resulting in an accuracy improvement.All critical dimensions are hard turned / ground after heat treat and the gas key has been hard chrome lined for the best possible wear resistance.All E-BCG's® feature the LANTAC CP-R360™ patent pending domed head cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx).The ultra smooth head reduces wear within the upper receiver.The BCG's 11.7oz weight helps to increase lock time and smoother operation.Gas keys are properly staked at four points and only grade 8 fasteners are used in assembly.The E-BCG's® forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors. However, it should be noted that the E-BCG® is not a complete solution for this issue and all rifles are different. 'Over Gassed' guns will suffer to a larger extent from this problem.   Weight 11.7oz Full Auto & Semi-Auto CompatibleForward Porting, enlarged vents.Balanced flared boss.8620 Carrier, Heat Treated, Hard Turned & Ground.MPI Carpenter 158 Bolt, Shot Peened, Hard Turned / Ground.TiN DLC coating.CP-R360 Domed Cam PinMil-Spec Gas RingsMil-Spec Staked Gas KeyGrade 8 Hardened FastenersAll Hard Chrome surfaces are to MIL-STD-171 Peening is conducted with S110 shot, Established by Almen Gage A-2 strip .006 -.008Lifetime Warranty. Patented. Made in the USA.
More Information
ManufacturerLanTac USA LLC
Caliber5.56 NATO
Recoil PadNo
Manufacturer Part Number01-UP-556-TIN-EBCG
CA Prop 65Yes